A comprehensive introduction to the line array system audio of the related Beilarly audio
Linear array audio equipment, that is, a linear array speaker system, is a group of radiating units arranged in a line and closely spaced, with the same amplitude and phase, and is an important part of stage audio equipment. p>
The linear array system audio developed and produced by Beilarly professional audio manufacturers has excellent language intelligibility, sufficient dynamics, beautiful sound quality and strong mid-to-low frequencies, with good directivity, long radiation distance, uniform sound supply, and low interference. The characteristics of clear sound and extremely high resolution can meet the needs of celebrations, touring shows, outdoor performances, stadiums, concerts, etc. p>
QSC-Q1 dual 6.5-inch full-frequency linear array speaker This is a very compact vertical linear array system with clear language clarity, sufficient dynamics, beautiful sound quality and only in the same type system that is much larger A strong mid-low frequency that can be achieved. Even if you stand on the console 40 meters away from the stage, you can still hear high-quality sound. Up to 3 units operate simultaneously in a cabinet less than 60 cm wide. In the middle of the cabinet is a high-frequency horn. The tweeter unit is a 75-core compression drive unit, which promotes the newly developed 10 degree vertical coverage wave catheter, which is installed on the same axis as the low-frequency unit. In the horizontal coverage angle, you can choose 80 degrees and 120 degrees. The low frequency is driven by two 8-inch long-stroke low-frequency units.
The QSC-Q1S single 12-inch mid-low line array speaker is a direct-shooting design subwoofer. The low frequency is full of flexibility, strong and dynamic range, which makes this series of products play more perfect. Use rectangular box birch plywood, polyester black pearl paint on the surface to achieve waterproof, sun protection, wear resistance and protection and modification; high-power speaker design can better meet the uniformity of the sound field and sound pressure level, and users are recommended to choose The matched use of 8 Euro / 400W power amplifier makes the QSC-Q1S more powerful and exerts the best results.
QSC-Q2 dual 8-inch full-frequency linear array speaker This is a very compact vertical linear array system, with clear language clarity, sufficient dynamics, beautiful sound quality and only in the same type system that is much larger A strong mid-low frequency that can be achieved. Even if you stand on the console 40 meters away from the stage, you can still hear high-quality sound. Up to 3 units operate at the same time in the cabinet. In the middle of the cabinet is a high-frequency horn. The tweeter is a 44-core compression drive unit. It promotes the newly developed 10 degree vertical coverage wave catheter and low-frequency unit. Installed on the same axis. In the horizontal coverage angle, you can choose 80 degrees and 120 degrees. The low frequency is driven by two 6-inch long-stroke low-frequency units.
The QSC-Q2S single 15-inch mid-low line array speaker is a direct-shooting design subwoofer. The low frequency is full of flexibility, strong and dynamic range, which makes this series of products play more perfect. The system uses a rectangular box of 18% birch plywood, and the surface of the polyester black pearl spot paint achieves the functions of waterproof, sun protection, wear resistance, protection and modification; the design of the high-power speaker can better meet the uniformity and sound pressure level of the sound field, and it is recommended The user chooses 8 ohm / 600W power amplifier to match the use, making the QSC-Q2S more powerful and exerting the best results.
The QSC-Q3 single 10-inch full-frequency line array speaker is a 10-inch woofer and two 1.4-inch tweeter drivers. The compression cavity phase plug installed on the front of the 10-inch cabinet is combined with the optimization of the two tweeter drivers through coupling. The waveform generator forms a 10 ° vertical wave surface, generating very thick low frequencies and bright treble. At the same time, this line array speaker is more versatile, and only needs 2 QSC-Q3 to perform a high-quality, small sound reinforcement system.
The QSC-Q3S single 15-inch mid-low line array speaker is a very compact low-frequency extension speaker. It weighs only 32 kg and is 44 cm high. This is the first choice for occasions where there are restrictions on hanging weight and height. It adopts a flat direct shot design, which is full of flexibility and strong low frequency, and has a larger dynamic range, which makes this series of products play more perfect.
The QSC-Q4 single 12-inch full-frequency line array speaker is a 12-inch woofer and a 75-core tweeter driver. The tweeter driver can generate a very thick low frequency and bright treble through a specially designed wooden horn coupling. With only 2 QSC-Q4, you can perform a high-quality, small sound reinforcement system.
The QSC-Q4S single 18-inch low and medium linear array speaker adopts a rectangular box of 18% birch plywood with polyester black pearl point paint on the surface to achieve waterproof, sun protection, wear resistance, protection and modification. The speakers are extremely flexible at low frequencies and have a strong dynamic range. The design of the high-power speaker can better meet the uniformity and sound pressure level of the sound field. It is recommended that users choose 8 ohm / 1000W power amplifier to match.
QSC-Q5 dual 12-inch full-frequency linear array speaker is a dual 12-inch three-way 6-unit high-power stage performance speaker, with QSC-Q5S mid-bass speakers, not only high sound quality, but also easy to install. It has a true and natural performance, characterized by small size, light weight, long projection distance, high sensitivity, strong penetration, high sound pressure level, clear voice, strong reliability, and even sound coverage between areas. The durable appearance uses high-density birch plywood as the structural material of the box, and the surface of the box is made of polyurea paint with high durability. Such speakers have very strong anti-aging strength, can withstand the sun and rain for a long time, and are installed indoors to prevent harsh environments such as humidity. They are designed for theaters, stadiums, outdoor performances and other places. Linear array speakers, the cabinet is equipped with two 12-inch low-frequency drivers, two 8-inch midrange and two 1.4-inch treble, special treble horn and midrange coupling method to form an ultra-high-power high-performance long-range linear array speaker .
The QSC-Q5S dual 15-inch low and medium line array speaker contains two high-power 15-inch speakers. The sturdy birch plywood can better play the stability of ultra-low frequency, with strong impact force and long-range impact force Even the long distance can feel the ultra-low power of the buffer. The installation is simple, convenient, fast, safe, and has excellent stability under all-weather outdoor use. The exterior uses polyurea paint for protection. Even if it is used in places with extreme heat and wind, sand, acid rain, ultraviolet rays, etc., it can be stable for a long time jobs.
The QSC-10 dual 10-inch two-way linear array speaker has a true and natural performance. It is characterized by long projection distance, high sensitivity, strong penetration, high sound pressure level, clear voice, strong reliability, and even sound coverage between areas. Features. It is a linear array speaker specially designed for theaters, stadiums, outdoor performances and other places. The cabinet is equipped with two 10-inch low-frequency drivers, two 1.7-inch trebles, and a special treble horn coupling mode constitutes high-power high-efficiency Long range linear array speaker.
The QSC-12 dual 12-inch mid-low frequency linear array speaker contains two high-power 12-inch speakers. The sturdy birch plywood can better display the stability of ultra-low frequency. This speaker has a very strong impact force and a long-range impact force, and even the long distance can feel the ultra-low power of the buffer. The installation is simple, convenient, fast, safe, and has excellent stability under all-weather outdoor use. The exterior uses polyurea paint for protection. Even if it is used in places with extreme heat and wind, sand, acid rain, ultraviolet rays, etc., it can be stable for a long time Work, suitable for outdoor mobile large-scale sound reinforcement systems, theaters, stadiums, large indoor SHOW bars, night clubs, large stages, large bars, multi-function halls, and fixed installation systems.
The QSC-10B dual 10-inch full-frequency linear array speaker has excellent frequency response. It can provide a flat response output in the range of 50-20KHZ. With the QSC-18S mid-bass, the low frequency limit can be extended to 30Hz. The whole system adopts two-way four-unit, external frequency division design, two 10-inch mid-woofers with phase plugs, two 1.7-inch tweeter drivers, combined with special coupling horn, can control the high frequency directivity. According to the needs of on-site sound reinforcement, it also satisfies the effective attenuation within 10 degrees of vertical. So that when multiple speaker systems work at the same time, there is no interference between them, which meets the requirements of range sound reinforcement. The medium and high frequency are delicate and transparent, and the low frequency is thick and strong, suitable for various types of large and medium-sized occasions. The system is a combination of various optimized designs. The physical characteristics and electro-acoustic performance are optimized to the greatest extent. The hanging device designed by the mold makes the installation of the product simpler and more convenient, and the joint is more reasonable. The point is more scientific, which can satisfy the lifting of 12 QSC-10B at the same time without safety problems. Whether it is fixed installation or mobile performance, lifting is very convenient. The four-point lifting combination makes it more convenient to use with QSC-18S.
The QSC-18S single 18-inch mid-low line array speaker adopts an 18-inch woofer combined with a perfect cabinet acoustic structure design to make it produce a thick low-frequency thrust. The hanging device makes the installation of the product easier and more convenient, the junction is more reasonable, and the focus is more scientific. Whether it is fixed installation or mobile performance, lifting is very convenient.