New product-single 12 inch double treble active line array-fully imported neodymium magnetic unit top matching system

Q7 is a single 12-inch two-way linear array speaker. Q7 with speaker rotation is used to install the speaker horizontally. In a certain space, Q7 can be used as an independent full range of audio systems; it can also be used in combination with other Q series cabinets. Can be stacked or mounted on a high rack with rotating brackets. They can also be combined in a flying array system. The Q7 cabinet is made of marine plywood and has an impact-resistant paint finish. The front of the speaker box is protected by a rigid metal grille, covered with replaceable acoustic transparent foam.

Suitable for all kinds of weddings, exhibitions, road shows, small and medium-sized performance occasions, of course, also suitable for fixed installation of small and medium-sized theaters, bars, performing arts halls, conference centers, exhibition centers, multi-function halls.

Q7 technical parameters:

★ Single 12-inch (two-way linear array speaker) unit combination: 12 "Low neodymium magnet (imported Paudio) + 2 * 2.5" neodymium magnet Hi (imported Paudio)

★ Frequency response: 60Hz ～ 20KHz (± 3dB)

★ Power (RMS / peak): 630W / 1260W, MF: 450W / 900W, HF: 180W / 360W

★ Sensitivity (1 W / m): MF: 106dB / HF: 116dB

★ Maximum rated sound pressure: MF: 131dB / HF: 136dB (peak @ 1m)

★ Impedance: MF 4 Ohm / HF 4 Ohm

★ Diffusion angle (H × V): 120 ° × 10 °

★ Power amplifier output power: 500W + 1200W / D type digital power amplifier

★ Distortion:<0.05%

★ Cooling method: natural cooling

★ Intelligent control: reduce the sensitivity by half for 5 minutes without signal, turn off the main power amplifier for 20 minutes without signal, and return to normal sound pressure level with signal 0.6S

★ Power interface: locking powerCON AC power input interface

★ Working voltage: 170V-240v / 50Hz

★ Built-in one-in and two-out digital audio processor, adjustable frequency division, EQ, pressure limit, delay for each channel

★ Net weight: 26.5kg

★ Dimensions (L × W × H): 650 × 419 × 348mm

Q7S technical parameters:

Q7S single 18 inch line array subwoofer

◆ Single 18-inch line array subwoofer with built-in power amplifier, used with 12A.

◆ Unit combination: 18 "Woofer (imported LA neodymium magnetic unit)

◆ Rated power 1000W, maximum power 2000W, sensitivity 108dB, maximum sound pressure level 142dB peak, @ 1m.

◆ Frequency response: 33Hz ～ 200Hz (± 3dB)

◆ Built-in amplifier output power: 2500W / D digital power amplifier

◆ Built-in amplifier input impedance: 20 KΩ

◆ Built-in amplifier input sensitivity: 0.775V

◆ Distortion of built-in power amplifier: ﹤ 0.05%

◆ Damping coefficient of built-in power amplifier: ≥ 400

◆ Cooling method: natural cooling

◆ Working voltage of built-in power amplifier: 170V ～ 265V 50 / 60Hz

★ Cooling method: natural cooling

★ Intelligent control: reduce the sensitivity by half for 5 minutes without signal, turn off the main power amplifier for 20 minutes without signal, and return to normal sound pressure level with 0.6S

◆ Built-in one-in and two-out digital audio processor, each channel can be connected through computer to adjust frequency division, EQ, pressure limit, delay, etc.

◆ Color: Black

◆ Net weight: 45kg

◆ Dimension (L * W * H): 650 × 757 × 540mm