1.-Q1 is a very compact vertical linear array system, with clear language clarity, sufficient dynamics, beautiful sound quality and strong mid-low frequency that can only be achieved with a much larger system of the same type. Even if you stand on the console 40 meters away from the stage, you can still hear high-quality sound.
2. Up to 3 units operate simultaneously in a cabinet less than 60 cm wide. In the middle of the cabinet is a high-frequency horn. The tweeter unit is a 75-core compression drive unit, which promotes the newly developed 10 degree vertical coverage wave catheter, which is installed on the same axis as the low-frequency unit. In the horizontal coverage angle, you can choose 80 degrees and 120 degrees. The low frequency is driven by two 8-inch long-stroke low-frequency units.

technical parameter:

Model：Q1

LF driver：2×6.5"

MF driver：/

HF driver： Ф44mm

Frequency response(Hz)：75 - 3k Hz LF/1.3k - 20k Hz HF

Impedance(ohms)：16Ω LF/16Ω HF

Rms power (W)：300W LF/100W HF

Peak power (W)：600W LF/200WHF

Sensitivity(SPL 1W@1M)85dB LF/93dB HF

Maximum SPL (dB)：120dB LF/116dB HF

Coverage angle：80°× 55°

Structure: birch wood

Finish: water-based paint

System type：crossover outside

Connector：SPEAKON*2 pin1=LF pin2=HF

Net weight(Kg)：14.5Kg

Physical size (L * L * H * W)mm： 576×202×305

Q1S is a single 12 inch low and medium line array speaker

1.Q1S is a direct-shooting design subwoofer. It is flexible and powerful at low frequencies, and has a larger dynamic range, which makes this series of products more perfect. Beilarly engineers match this series on the most ideal frequency response design The full frequency is used indoors, and their combination can achieve a very smooth and smooth frequency advantage, and the connection is very accurate.

2.Q1S adopts rectangular box birch plywood, polyester black pearl paint on the surface to achieve the effects of waterproof, sun protection, wear resistance, protection and modification; the design of high-power speakers can better meet the uniformity and sound pressure level of the sound field, At the same time, it is recommended that users choose 8 ohm / 400W power amplifier to match, so that the Q1S is more powerful and exerts the best results.

Model：Q1S

LF driver：1×12"SUB

Frequency response(Hz)：40Hz-350Hz

Impedance(ohms)：8Ω

Rms power (W)：400W

Peak power (W)：800W

Sensitivity(SPL 1W@1M)：95dB

Maximum SPL (dB)：127dB

Structure: birch wood

Finish: water-based paint

Connector：SPEAKON*2

Net weight(Kg)：28Kg

Physical size (L * L * H * W)mm：576×350×405